As an Amazon Associate I earn from qualifying purchases.
Then secure each cable by rotating the screws clockwise CW to the closed position. Wanderer10a|30a installation notes the default starting position of the wanderer controller terminal hatches are closed in the UP position that could mistakenly look like an open wire hatch.
Multiple battery adaptation Deep Cycle Sealed AGM, Gel, Flooded and Lithium battery option ready. Make sure to first lower each terminal hatch by screwing the terminals counterclockwise CCW to expose the wire terminal hatch to the open position. Smart 4-stage pwm chargingsmart 4-stage pwm charging bulk, short-circuit, and Equalization increases battery life and improves system performance.

Backlit lcd displaying system: the voyager comes with an LCD display showing accurate and timely information including charging current, battery voltage, generated energy, temperature, and error codes that allows users to monitor and control charging.4
It provides 4-stage charging Bulk, Absorption, Float and Equalization in order to protect the battery. Ip67 rated waterproof: with an ip67 rated waterproof design, rain, the Voyager controller is suitable for outdoor use and will remain fully operational when exposed to water spray, or condensation.

Multiple load control modes: 24Hours Working Control, Light Control, Light and Dual Time Control. Double usb output 5v/2a and lcd display with Back-lighting shows device’s operating data and working condition.

More safe for home, industrial, commercial etc. Lcd displaybacklight lcd display pv/battery/Load charge and discharge parameter. Dual usb can give your electronic product max 5V 2. 5a.
For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically. Upgraded solar panel controllerthis 30a solar charge controller compatibility with 12v 24V system. Fully 4-stage pwm charge boost, float, equalization, abs, the power MOSFET is used as and electronic switch without any mechanical switches and equipped with industrial-grade STM 8 microprocessor to prolong your battery life cycle.

Multiple battery adaptation Deep Cycle Sealed AGM, Gel, Flooded and Lithium battery option ready. This ensure compatibility with any negative ground system, which is the standard and most conventional way of grounding.
12v/24v automatically detectautomatically detects 12v or 24v dC system voltages for non-lithium batteries. An included surface Mount Attachment allows for versatility in mounting. Flush mount designdesigned to cleanly flush mount on walls, providing a sleek, integrated look. Smart 4-stage pwm chargingsmart 4-stage pwm charging bulk, Float, and Equalization increases battery life and improves system performance.

Multi-protection to ensure safety built in over temperature protection, over load protection, over charging protection, over current protection, over voltage protection, short circuit protection to provide full protection for your battery, over discharging protection, to maximally avoids the damage due to system fault or installation error.
Completely powered by solar directly, no power consumption for the battery! Come with auto memory function, automatically return to its last selected mode. Check our mppt with polarity adapter ASIN: B09W5YCRR7. 3 stage charging: boost, car, marine, and equalization to get the maximun use of solar energy. Easy to use sae connector allows fast and easy connection, plug and play. High tracking efficiency of up to 95% while PMW charge controller is 65%-80%. Great for deep cycle, powersport and more.


Mppt charge controller with blackligh LCD screen for displaing system information and working condition. Auto identifying 12V/24V DCsystem voltage.
The tracer an's charging process has been optimized for long battery life and improved system performance. It includes a 4-stage battery charging Bulk, Boost, Float, and Equalization and temperature compensation increase your battery life and improve your system's performance. Multiple load control method, APP and MT-50 Solar charge regulator support pc software, flooded and lithium.

It can remotely control MPPT and view relevant data through the mobile phone of Android system. Lcd display-clear to see operating data and working condition, Real-time energy statistics function with Multiple load control modes, Mppt solar charge controller Display the daily power generation curve and current curve.
Auto control system to limit the charging power & current go over the rated value. Rs485 communication:connect a wifi box need to buy extra. Solar rv, can be widely used for various applications, etc. The tracking rate of maximum power is ≥99% and the maximum conversion rate is >98%, household system and industrial field monitoring, e. G.

1v or 14. 8v. Fan heat dissipationintelligence fan-on temperature >45℃ and off < 40℃, commercial Vehicles, Porous heat dissipation.
Suitable for rvs, Yachts, Boats, and Solar system. Built-in dsp controller with high performance automatic battery voltage detection 12V/24V/36V/48V, Make sure batteries' voltage more than 12V to boost controller and make sure battery has enough power to Self-detection when connected to the controller. Two connectors for each pos and negs on solar and batteries connectors. User programmable for absorption voltage/Floating voltage/Low voltage disconnect. Load Timer.
1. Renogy
#ad
Gel, and Flooded Batteries, Renogy Wanderer Li 30A 12V PWM Negative Ground Solar Charge Controller Solar Panel Regulator w/ Temp Sensor Function Fit for Lithium, Sealed, Wanderer Li 30A
#adRenogy #ad - Optimized for 12v batteriescompatible with 12V battery banks on the market, including lithium batteries. Compact in sizeWhich makes it easy to install virtually anywhere. The led indicators allow you to set battery types and check the charging staus with ease.Then secure each cable by rotating the screws clockwise CW to the closed position. Wanderer10a|30a installation notes the default starting position of the wanderer controller terminal hatches are closed in the UP position that could mistakenly look like an open wire hatch.
More information #ad
Intelligent protection against reverse polarity, Float, overcharging, Boost, and reverse current. Multiple battery adaptation Deep Cycle Sealed AGM, Gel, Flooded and Lithium battery option ready. Make sure to first lower each terminal hatch by screwing the terminals counterclockwise CCW to expose the wire terminal hatch to the open position. Smart 4-stage pwm chargingsmart 4-stage pwm charging bulk, short-circuit, and Equalization increases battery life and improves system performance.
Brand | Renogy #ad |
Manufacturer | Renogy #ad |
Height | 1.76 Inches |
Length | 6.45 Inches |
Weight | 0.3 Pounds |
Width | 4.31 Inches |
Part Number | RNG-CTRL-WND30-LI |
Model | Charge Controller |
Warranty | 1-year material and workmanship warranty |
More information #ad
2. Renogy
#ad
Flooded and Lithium Battery, Boats, Renogy Voyager 20A 12V/24V PWM Waterproof Solar Charge Controller w/ LCD Display for AGM, Gel, Voyager 20A, Yachts, Used in RVs, Trailers
#adRenogy #ad - It also comes with a Lithium activation feature. Multiple protections: the voyager controller has multiple intelligent protections against reverse polarity, over charge, reverse current, short-circuit, and over discharge, overload, keeping your battery fully protected.Backlit lcd displaying system: the voyager comes with an LCD display showing accurate and timely information including charging current, battery voltage, generated energy, temperature, and error codes that allows users to monitor and control charging.4
More information #ad
4-stage pwm technology: the voyager controller is equipped with advanced smart PWM technology with high charging efficiency. Support multiple battery types: the voyager controller can automatically sense 12V or 24V system voltage when paired with a Gel, AGM, or Flooded batteries. It provides 4-stage charging Bulk, Absorption, Float and Equalization in order to protect the battery. Ip67 rated waterproof: with an ip67 rated waterproof design, rain, the Voyager controller is suitable for outdoor use and will remain fully operational when exposed to water spray, or condensation.
Brand | Renogy #ad |
Manufacturer | Renogy #ad |
Height | 1.4 Inches |
Length | 6.08 Inches |
Weight | 0.55 Pounds |
Width | 3.83 Inches |
Part Number | RCC20VOYP-G1 |
Model | Voyager |
Warranty | 2-year material and workmanship warranty |
More information #ad
3. PowMr
#ad
30amp Charge Controller, PWM Solar Controller 30A Fit for MAX 1500W Solar Power 12V 24V 36V 48V Lithium/AGM/Gel/Flooded Battery
#adPowMr #ad - Controller automatic temperature compensation and Full protection, like Reverse-Polarity, Over-Load, Battery Reverse, Over-Heating, Over-Current, Low-Voltage Lightning Protection.Multiple load control modes: 24Hours Working Control, Light Control, Light and Dual Time Control. Double usb output 5v/2a and lcd display with Back-lighting shows device’s operating data and working condition.
More information #ad
30a pwm solar controller, intelligent controller able to choose 12V/24V/36V/48V Lead-acid battery Sealed, Flooded and Lithium battery LiCoMnNiO2, Gel, LiFePO4.4 stages pwm charging: Bulk, Equalize, Absorption, Float;.Brand | PowMr #ad |
Manufacturer | PowMr #ad |
More information #ad
4. EpRec
#ad
EpRec 30A 12V 24V PWM Solar Charge Controller Lithium Battery Charge Controller Compatible with Lead Acid/ Lithium-ion/ Lithium Iron Phosphate Battery
#adEpRec #ad - Customer first12 months honor warranty from EpRec and 24hrs after service. Your satisfaction is our priority. Safe to usepwm charge controller protection:dual mosfet Reverse current /over heat /Under-voltage discharge discharge /short-circuit /open-circuit / over-load /over-charging protection.More safe for home, industrial, commercial etc. Lcd displaybacklight lcd display pv/battery/Load charge and discharge parameter. Dual usb can give your electronic product max 5V 2. 5a.
More information #ad
Intelligent controlthis solar controller fit for lithium-ion/ lithium iron phosphate /lead-acid batteriesOPEN, GEL, AGM, with mutiple load timerLoad should be DC. It has a wide range of applicability and automatically identifies daytime/night. For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically. Upgraded solar panel controllerthis 30a solar charge controller compatibility with 12v 24V system. Fully 4-stage pwm charge boost, float, equalization, abs, the power MOSFET is used as and electronic switch without any mechanical switches and equipped with industrial-grade STM 8 microprocessor to prolong your battery life cycle.
Brand | EpRec #ad |
Manufacturer | EpRec #ad |
More information #ad
5. Renogy
#ad
Renogy 30A 12V/24V PWM Solar Charge Controller with LCD Display Flush Mount Design Negative Ground, Gel, Flooded and Lithium Batteries, Compatible with Sealed, Adventurer 30A
#adRenogy #ad - Negative groundthe adventurer is a negative ground controller. Any negative connection on the solar module, battery and load can be safely earth grounded as required. Intelligent protection against reverse polarity, short-circuit, overcharging, Boost, and reverse current.Multiple battery adaptation Deep Cycle Sealed AGM, Gel, Flooded and Lithium battery option ready. This ensure compatibility with any negative ground system, which is the standard and most conventional way of grounding.
More information #ad
The lcd screen and multiple LED indicators display the solar charging and battery operation information, customizable parameters, and error codes. 12v/24v automatically detectautomatically detects 12v or 24v dC system voltages for non-lithium batteries. An included surface Mount Attachment allows for versatility in mounting. Flush mount designdesigned to cleanly flush mount on walls, providing a sleek, integrated look. Smart 4-stage pwm chargingsmart 4-stage pwm charging bulk, Float, and Equalization increases battery life and improves system performance.
Brand | Renogy #ad |
Manufacturer | Renogy #ad |
Height | 1.9 Inches |
Length | 6.56 Inches |
Weight | 0.6 Pounds |
Width | 4.5 Inches |
Part Number | RNG-CTRL-ADV30-LI |
Model | Adventurer 30A Li 12V/24V |
Warranty | NEVER connect the solar panel array to the controller without a battery. Battery must be connected first. This may cause a dangerous occurrence where the controller would experience a high open circuit voltage at the terminals. • Ensure input voltage does not exceed 50 VDC to prevent permanent damage. Use the Open Circuit (Voc) to make sure the voltage does not exceed this value when connecting panels together in series. • The charge controller should be installed indoors in a well-ventilated, cool, and dry environment. • Do NOT allow water to enter the controller. |
More information #ad
6. Allto Solar
#ad
Allto Solar Intelligent 10A MPPT Solar Charge Controller,10 Amp 12 Volt Solar Panel Regulator with Digital LCD Display + Temp Sensor + Charging Level for 12 Volt Wet Gel AGM Lithium LiFePO4 Battery
#adAllto Solar #ad - Compact & portable improved over the pmw charge controller, allto solar mppt maximum power point tracking charge controller bringing a new generation to maximizing use solar power to charge your system, it is 25% smaller in size but captures as high as 15%-30% performance to charge the battery with no additional self power consumption.Multi-protection to ensure safety built in over temperature protection, over load protection, over charging protection, over current protection, over voltage protection, short circuit protection to provide full protection for your battery, over discharging protection, to maximally avoids the damage due to system fault or installation error.
More information #ad
Works with multiple batteries compatible with agm, float, starter, gel, Deep Cycle Sealed, gel, Flooded and LiFePO4 Lithium Battery. Temp sensor an integrated thermal sensor eliminates over-charging in hot climates and under-charging in cold climates. Completely powered by solar directly, no power consumption for the battery! Come with auto memory function, automatically return to its last selected mode. Check our mppt with polarity adapter ASIN: B09W5YCRR7. 3 stage charging: boost, car, marine, and equalization to get the maximun use of solar energy. Easy to use sae connector allows fast and easy connection, plug and play. High tracking efficiency of up to 95% while PMW charge controller is 65%-80%. Great for deep cycle, powersport and more.
Brand | Allto Solar #ad |
Manufacturer | Allto Solar #ad |
Height | 0.98 Inches |
Length | 5.5 Inches |
Width | 1.97 Inches |
Model | MPPT SAE Connector |
More information #ad
7. Renogy
#ad
Rover Elite 40A, Renogy 40A 12V/24V Auto MPPT Solar Charge Controller with LCD Backlit Display w/ Temp Sensor Fit for Gel Sealed Flooded and Lithium Battery
#adRenogy #ad - 8v, flooded, and Sealed/AGM. Advanced mppt technology with up to 99% high tracking efficiency, 96% conversion efficiency, and Lithium-reawakening feature. 12v /24v automatic System Recognition.More information #ad
Multiple electronic protection Features, reverse polarity, including overcharging, over-discharging, and over-temperature. Power source Type: Solar Powered. 4 deep cycle battery pre-sets: gel, lithium-Iron Phosphate 12. Backlit lcd displays system information and identifying error codes.Brand | Renogy #ad |
Manufacturer | Renogy #ad |
Height | 3.02 Inches |
Length | 7.85 Inches |
Weight | 3 Pounds |
Width | 5.12 Inches |
Part Number | RCC40RVRE-G1 |
Model | RCC40RVRE-G1 |
Warranty | 1-year material warranty |
More information #ad
8. EPEVER
#ad
Solar Charge Controller Max 100V Input Negative Grounded Solar Regulator, EPEVER MPPT Solar Charge Controller 30A 12V 24V Auto, for Lead-Acid and Lithium Batteries
#adEPEVER #ad - Maximizing the energy from solar panels to charge your system. Negative ground charge controller featuring advanced MPPT technology with high tracking efficiency up to 99. 5% and peak conversion efficiency of 98%. It protect the battery from being over-charged by the solar modules and over-discharged by the loads.Mppt charge controller with blackligh LCD screen for displaing system information and working condition. Auto identifying 12V/24V DCsystem voltage.
More information #ad
Also compatible with various Deep Cycle battery options: Sealed, Gel,. Die-cast aluminum design allows for efficient heat dissipation. This mppt controller protection built-in against reverse polarity, short-circuiting, overload, overcharging, over-discharging, and reverse current. The tracer an's charging process has been optimized for long battery life and improved system performance. It includes a 4-stage battery charging Bulk, Boost, Float, and Equalization and temperature compensation increase your battery life and improve your system's performance. Multiple load control method, APP and MT-50 Solar charge regulator support pc software, flooded and lithium.
Brand | EPEVER #ad |
Manufacturer | EPEVER #ad |
Part Number | Tracer 3210AN |
Model | Tracer 3210AN |
More information #ad
9. AMPINVT
#ad
80 Amp MPPT Solar Charge Controller 48V 36V 24V 12V Auto, 80A Solar Panel Regulator Max Input Power 1100W-4500W, for AGM Sealed Gel Flooded Lithium Battery
#adAMPINVT #ad - Fit for solar panel: 1140w12v;2260w24v;3420w36v;4540w48v;max input voltage:150v pv;mppt best working voltage range:DC18V-DC80V12V;DC30V-DC100V24V;DC65V-DC150V48V. Support for 4 type battery charging: Lead-acid Sealed, AGM, Gel, Flooded and User Lithium Battery.It can remotely control MPPT and view relevant data through the mobile phone of Android system. Lcd display-clear to see operating data and working condition, Real-time energy statistics function with Multiple load control modes, Mppt solar charge controller Display the daily power generation curve and current curve.
More information #ad
Apc series mppt charge controller: 12v/24v/48v auto identifying system volt. Auto control system to limit the charging power & current go over the rated value. Rs485 communication:connect a wifi box need to buy extra. Solar rv, can be widely used for various applications, etc. The tracking rate of maximum power is ≥99% and the maximum conversion rate is >98%, household system and industrial field monitoring, e. G.
Brand | AMPINVT #ad |
Manufacturer | Top One Power #ad |
Part Number | AP-80C |
Model | AP-80C |
More information #ad
10. PowMr
#ad
60A MPPT Charge Controller 12V/24V/36V/48V DC Input Solar Charge Controller MPPT Max 160VDC Input LCD Display Solar Charge Solar Panel Regulator for Sealed Gel AGM Lithium Battery
#adPowMr #ad - Notictionif you use sealed lead acid, the controller can adjuste automaticly and work normally; but if you use lithium batteries, becauese the voltage of lithium batteries is unstable, vented gel battery, you donn't need to set any parameters, such as acid battery 12V is 12V, you need to properly adjuste parameters according to the actual voltage of the battery, and etc, lithium battery 12V may be 11.1v or 14. 8v. Fan heat dissipationintelligence fan-on temperature >45℃ and off < 40℃, commercial Vehicles, Porous heat dissipation.
More information #ad
And fan use bearing technologies increase life UP TO 5000hrs in normal use. Troubleshooting function and lcd display and can help users not only check the whole system operating data and statuses but also quickly identify system faults and modify parameters. Suitable for rvs, Yachts, Boats, and Solar system. Built-in dsp controller with high performance automatic battery voltage detection 12V/24V/36V/48V, Make sure batteries' voltage more than 12V to boost controller and make sure battery has enough power to Self-detection when connected to the controller. Two connectors for each pos and negs on solar and batteries connectors. User programmable for absorption voltage/Floating voltage/Low voltage disconnect. Load Timer.
Brand | PowMr #ad |
Manufacturer | PowMr #ad |
More information #ad