As an Amazon Associate I earn from qualifying purchases.
1. Renogy #ad
And Flooded batteries and Renogy Bluetooth Module, Sealed, Gel, Renogy Wanderer Li 30A 12V PWM Negative Ground Charge Controller Compatible with Lithium #adRenogy #ad
- Optimized for a 12v system; Deep cycle Sealed, Gel, Flooded, and Lithium battery option ready. Simple install: fully open the hatch CCW, insert the appropriate wires, and completely close the hatch CW.
Then secure each cable by rotating the screws clockwise CW to the closed position. Wanderer10a|30a installation notes: the default starting position of the wanderer controller terminal hatches are closed in the UP position that could mistakenly look like an open wire hatch.
Multiple led indicators for easy to read charge status and battery information. Make sure to first lower each terminal hatch by screwing the terminals counterclockwise CCW to expose the wire terminal hatch to the open position.
|Warranty||1-year material and workmanship warranty|
2. PowMr #ad
PowMr Solar Controller 60A, 12V 24V 36V 48V Auto Dual USB Output Charge Controller Fit for Lithium/Lead-Acid Battery Regulator #adPowMr #ad
- Double usb output 5v/2a, automatic temperature compensation and accumulated function of charge and discharge KWH;. Intelligent 4 stages pwm charge controller: bulk, float; Can work with Lead-acid battery Sealed, Gel, Flooded and Lithium battery LiCoMnNiO2, Equalize, absorption, LiFePO4;.
60a pwm solar controller, 12v 24v 36v 48v dc auto, max solar power up to 720w when 12V system; 1440W/24V; 2160W/36V; 2880W/48V;. Rich lcd display with Back-lighting shows device’s operating data and working condition.
3. BougeRV #ad
Dual USB Ports, AGM, Gel, Solar Panel Intelligent Regulator Positive Ground, BougeRV 30Amp 12V/24V PWM Solar Charge Controller, Adjustable Parameter with LCD Display, FLD, Lithium Battery, for SLD #adBougeRV #ad
- Warranty and attentions : please connect the battery to the solar charge controller first to complete the recognition process and wake up the display. Bougerv pwm solar charge controller features with dual MOS circuit to prevent the reverse current and reduce the heat in operation. Easy wiring : come with 6 pcs of spade terminals, make your wiring neat and safer.
Intelligent regulator : compatible with 12v/24v batteriessld/fld/gel/lifepo4/ternary lithium battery, this solar charge controller is auto resettable after disconnecting, also be auto-wakeup for lithium battery after setting battery type.
Keep the conductivity, and no need to worry about the short circuit of the device caused by the copper wire branches contact other terminals. Input and output will be realtime updated in the LCD display. Certified by ce and rohs. Comprehensive protection : with 6 protections, reverse current protections.
Dual usb port, ipad, and android phones, load operating mode, this PWM solar charge controller can power devices such as iPhone, light control mode, maximum current can reach 2A. Custom your system : various parameters adjustable to design the tailored system for you. Please feel free to contact us if you have any problem with the product. Maintain your battery all the time. With the heat sink on the back sheet, open-circuit, over-temperature, short-circuit, reverse prevention circuit, overload, this solar charge controller can keep the stable work temperature.
4. HQST #ad
Flooded, Compatible with Gel, HQST PWM 20A 12/24V Waterproof Common Positive Solar Charge Controller with LCD Display, Lithium Batteries, AGM #adHQST #ad
- 4 battery type compatible – gel, float, flooded, Absorption, Lithium.4-stage pwm charging: Bulk, AGM, & Equalization. Smart pwm technology, high efficiency with reawakening Lithium feature.
Common positive charge controller. Protections: multiple Battery, Controller, and PV electronic protections. Backlit lcd displaying system operating information and error codes. Waterproof design, suitable for indoor or outdoor use.
5. Renogy #ad
Rover 30A, Renogy Rover 30A 12V/24V Auto DC Input MPPT Solar Charge Controller Parameter Adjustable LCD Display Solar Panel Regulator fit for Gel Sealed Flooded and Lithium Battery #adRenogy #ad
- It is the best charging solution even in cloudy environments where the max power point of the solar panels will fluctuate all day. 4-stage safely chargingfeatures 4-stage charging bulk, Float, Absorption, and Equalization of Lead Acid Batteries and 2-stage charging Bulk and Absorption for Lithiuim batteries as well as Lithium Reactivation.
Remote monitoringrs232 communication port allows the renogy rover to communicate with the Renogy BT-1 Bluetooth module NOT included in the package, highly recommend to add-on that will enable you to monitor the status and productivity of your panels through the Renogy DC Home App.
Diverse load control connect dc appliances directly to the optional Load Terminals and monitor consumption or set up timer controls directly from the controller. 12v/24v automatically detectautomatically detects 12v or 24V DC system voltages, and the LCD screen and multiple LED indicators display the solar charging and battery operation information, customizable parameters, and error codes.
Full system protectionmeant to safeguard your system, battery over-discharging, the self-diagnostic capability can assess and protect against reverse polarity, overload, short-circuiting, battery overcharging, and reverse current. Innovative mppt designdie-cast aluminium design ensuring excellent heat dissipation and Renogy Maximum Power Point Tracking technology with a high tracking efficiency of up to 99% and peak conversion efficiency of 98%.
|Part Number||fit for Gel Sealed Flooded and Lithium|
|Model||fit for Gel Sealed Flooded and Lithium|
|Warranty||2-year material and workmanship warranty|
6. Marsrock #ad
Marsrock Lithium Battery Wind Solar Hybrid Charge Controller with Wind Generator MPPT Boost Charging Function, with Dump Load Device and 50cm Cable, Used for Off Grid Wind Solar Hybrid System #adMarsrock #ad
- High performance and stable chip control. Dual power supply function: Battery + solar power supply. Lcd displays parameters such as voltage and current of wind, solar and load.
Wind generator MPPT boost charging function. Pwm dump load of wind, external dump-load resistance, intelligent disconnection of Solar charging.
|Manufacturer||Marsrock Power #ad|
7. Renogy #ad
Renogy Rover 60 Amp 12V/24V/36V/48V DC Input MPPT Solar Charge Controller Auto Parameter Adjustable LCD Display Solar Panel Regulator fit for Gel Sealed Flooded and Lithium Battery #adRenogy #ad
- Multiple protections eliminate Safety Hazards: Electronic protection against reverse polarity, overcharging, overload, over-discharging, short-circuiting, and reverse current.
Compatibility with multiple battery types for convenient use: Sealed Lead Acid, GEL, Flooded and Lithium Iron Phosphate. Easy to use lcd: lcd screen and multiple LED indicators for displaying system operation information, customizable parameters, and error codes.
Rs232: rs232 port allows the rover pg to communicate with the BT-1 Bluetooth module, which can pair with the Renogy DC Home smartphone app. Mppt technology: innovative mppt technology with high tracking efficiency up to 99% and peak conversion efficiency of 98%.
|Part Number||Solar Charge Controller|
|Model||Solar Charge Controller|
|Warranty||2-year material and workmanship warranty|
8. PowMr #ad
Max 160VDC Input LCD Backlight Solar Charge for Vented Sealed Gel NiCd Lithium BatterySoftware Update VersionMPPT-60A, PowMr MPPT Charge Controller 60 amp 48V 36V 24V 12V Auto #adPowMr #ad
- Copper wires:9AWG. Hope you love it. What you getwe consider that the larger diameter of the wire will be greater cost for customers, so we designed two connectors for each pos and negs on solar and batteries connectors. Software update version100% mppt 60a solar charge controller intelligent, pv utilization ≥99%.
Built-in dsp controller with high performance Automatic battery voltage detection 12V/24V/36V/48V, Max efficiency ≥98. 1%, make sure batteries' voltage more than 12V to boost controller and make sure battery has enough power to Self-detection when connected to the controller.
Intelligence fan-on temperature >45℃ and off < 40℃, Porous heat dissipation. And fan use bearing technologies increase life UP TO 5000hrs in normal use. Fit for usercan be set lithium, lifepo4, linicomno2/vented/flooded/Sealed/Gel/NiCd battery.
User programmable for absorption voltage/Floating voltage/Low voltage disconnect. Load Timer. Blacklight lcd dispaly pv voltage/output power/battery voltage/charging current/working mode/Temperature, TROUBLESHOOTING function and LCD display and can help users not only check the whole system operating data and statuses but also quickly identify system faults and modify parameters. Real-time energy recording.
9. HQST #ad
12V/24V DC Input Solar Panel Regulator for Gel Sealed Flooded and Lithium Battery, HQST MPPT Solar Charge Controller 20 Amp Negative Ground Controller with Bluetooth LCD Display #adHQST #ad
- Maximizing the energy from solar panels to charge your system. Built-in bluetooth module, you can download the PVChargePro app for remote monitoring that keeps 300 days of historical data. Compatible with multiple battery types- the mppt solar charge controller is compatible with Flooded, AGM, float, Lithium batteries.
Using temperature sensors to compensate for battery charging voltage can extend battery life and improve system performance. 3-stage charging: boost, Gel, and equalization. User mode allows the buyer to set their charging parameters. High tracking efficiency- solar charge controller adopts advanced mppt technology that ensures fast and stable track the maximum power point, high tracking efficiency of up to 99%, and peak conversion efficiency of 98%.
Multiple electronic protection- negative ground controller offers overcharging/over-discharging/overload/overheat/short circuit/reverse protection.
Lcd screen display & remote monitoring- 20a solar controller is equipped with an lcd screen and led fault indicators, which can not only check device operating data and status but quickly determine system faults and modify controller parameters. It auto detects 12V or 24V DC system voltages. High heat dissipation efficiency- die-cast aluminum heat sink makes the heat dissipation efficiency higher, which can minimize the power loss from heat. Maximum degree avoids the damage due to system fault or installation error.
|Manufacturer||HQST Solar #ad|
10. AMPINVT #ad
80A Solar Panel Regulator Max Input Power 1100W-4500W, for AGM Sealed Gel Flooded Lithium Battery Support Wireless Control Communication, 80 Amp MPPT Solar Charge Controller 48V 36V 24V 12V Auto #adAMPINVT #ad
- Auto control system to limit the charging power & current go over the rated value. The tracking rate of maximum power is ≥99% and the maximum conversion rate is >98%, can be widely used for various applications, household system and industrial field monitoring, e.
G. Solar RV, etc. Display the daily power generation curve and current curve. Optional wifi box, rs-485 conmmuication Wireless Monitoring by Mobile Phone APP, available to meet various communication requirements in different situations.
Fit for solar panel: 1140w12v;2260w24v;3420w36v;4540w48v;max input voltage:150v pv;mppt best working voltage range:DC18V-DC80V12V;DC30V-DC100V24V;DC65V-DC150V48V. Support for 4 type battery charging: lead-acid Sealed, Gel, AGM, Flooded and User Lithium Battery. Apc series mppt charge controller: 12v/24v/48v auto identifying system volt.