As an Amazon Associate I earn from qualifying purchases.
Renogy #ad - Wanderer10a|30a installation notes the default starting position of the wanderer controller terminal hatches are closed in the UP position that could mistakenly look like an open wire hatch. Make sure to first lower each terminal hatch by screwing the terminals counterclockwise CCW to expose the wire terminal hatch to the open position.
The led indicators allow you to set battery types and check the charging staus with ease.
Then secure each cable by rotating the screws clockwise CW to the closed position. Intelligent protection against reverse polarity, short-circuit, Float, Boost, overcharging, and reverse current. Compact in sizeWhich makes it easy to install virtually anywhere. Multiple battery adaptation Deep Cycle Sealed AGM, Gel, Flooded and Lithium battery option ready.
Renogy #ad - Multiple battery adaptation Deep Cycle Sealed AGM, Gel, Flooded and Lithium battery option ready. 12v/24v automatically detectautomatically detects 12v or 24v dC system voltages for non-lithium batteries. Flush mount designdesigned to cleanly flush mount on walls, providing a sleek, integrated look.
The lcd screen and multiple LED indicators display the solar charging and battery operation information, customizable parameters, and error codes.
Intelligent protection against reverse polarity, overcharging, and reverse current. An included surface Mount Attachment allows for versatility in mounting. Smart 4-stage pwm chargingsmart 4-stage pwm charging bulk, short-circuit, Float, Boost, and Equalization increases battery life and improves system performance.
Renogy #ad - Multiple protectionrenogy wanderer-li 30a pwm solar charge controller is equipped with multiple electronic protections: overcharging, short-circuit and reversed polarity, overload, which increases battery life and improve system performance.
Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades. Excellent performance22% high solar cell efficiency.
Corrosion-resistant aluminum frame for outdoor use, allowing the panels to last for decades as well as withstand high winds 2400Pa and snow loads 5400Pa. Wide application1600wh daily output depends on the 4 hours sunlight availability. This panel is suited for applications that require a smaller footprint, making it a favorite for those with RVs, campers, and more!.
Renogy #ad - It can prevent the battery from over charge, discharge and short circuit, over voltage, reversed polarity protection. And it supports 3 types of 12v batteries: lithium batteries, lead-acid batteries, gel batteries Not compatible with 24V batteries.
Multiple protectionrenogy wanderer-li is a 30a pwm solar charge controller that integrates efficient PWM charging to increase battery life and improve system performance. Easy installationpre-drilled holes and plug&play cables on the back allow for fast mounting.
Corrosion-resistant aluminum frame for outdoor use, allowing the panels to last for decades as well as withstand high winds 2400Pa and snow loads 5400Pa. Excellent performance22% high solar cell efficiency. Warranty5 year warranty and 24/7 technical support team, contact us through Amazon whatever any questions or concerns you have.
Renogy #ad - 4-stage pwm technology: the voyager controller is equipped with advanced smart PWM technology with high charging efficiency. Multiple protections: the voyager controller has multiple intelligent protections against reverse polarity, overload, and over discharge, short-circuit, reverse current, over charge, keeping your battery fully protected.
Ip67 rated waterproof: with an ip67 rated waterproof design, the Voyager controller is suitable for outdoor use and will remain fully operational when exposed to water spray, rain, or condensation.
Backlit lcd displaying system: the voyager comes with an LCD display showing accurate and timely information including charging current, temperature, generated energy, battery voltage, and error codes that allows users to monitor and control charging. It also comes with a Lithium activation feature.
Renogy #ad - Remote monitoringrs232 communication port allows the renogy Rover to communicate with the Renogy BT-1 Bluetooth module that will enable you to monitor the status and productivity of your panels through the Renogy DC Home App. 4-stage safely chargingfeatures 4-stage charging bulk, Float, Absorption, and Equalization of Lead Acid Batteries and 2-stage charging Bulk and Absorption for Lithiuim batteries as well as Lithium Reactivation.
Innovative mppt designdie-cast aluminium design ensuring excellent heat dissipation and Renogy Maximum Power Point Tracking technology with a high tracking efficiency of up to 99% and peak conversion efficiency of 98%.
12v/24v automatically detectautomatically detects 12v or 24v dc system voltages for Non-Lithium battery types, customizable parameters, and the LCD screen and multiple LED indicators display the solar charging and battery operation information, and error codes. Diverse load control connect dc appliances directly to the optional Load Terminals and monitor consumption or set up timer controls directly from the controller.
PowMr #ad - Controller automatic temperature compensation and Full protection, Battery Reverse, Over-Load, like Reverse-Polarity, Over-Heating, Over-Current, Low-Voltage Lightning Protection.
4 stages pwm charging: Bulk, Equalize, Absorption, Float;. Multiple load control modes: 24Hours Working Control, Light Control, Light and Dual Time Control.
BougeRV #ad - Easy wiring : come with 6 pcs of spade terminals, make your wiring neat and safer. Tracing the power faster and accurately with the 32 Bit High-Speed Master Chip. Intelligent regulator : compatible with 12v/24v batteries, sld/fld/gel/lifepo4/agm/ternary lithium battery, this solar charge controller is auto resettable after disconnecting, also be auto-wakeup for lithium battery after setting battery type.
Dual usb port, and android phones, light control mode, this PWM solar charge controller can power devices such as iPhone, maximum current can reach 2A. Input and output will be realtime updated in the LCD display.
Bougerv is dedicated to provide customers with high-quality product through constant improvement and also promise an 18 months warranty of each product. Warranty and attentions : please connect the battery to the solar charge controller first to complete the recognition process and wake up the display. Keep the conductivity, and no need to worry about the short circuit of the device caused by the copper wire branches contact other terminals. Maintain your battery all the time.
Renogy #ad - Rohs compliance and rated for outdoor use. Cable length: 118 in. Non-polarized wires are insulated and protected from harsh environments. Compatible with renogy Adventurer, Wanderer, Rover and Rover Elite series controllers. Wide temperature Compensation Range up to 176℉.
EEEKit #ad - Dual usb 5v/3a output ports support mobile phones, suitable for lead-acid batteries: OPEN, AGM, tablet PCs or other devices that require 5V voltage. The solar controller will turn off automatically once the voltage is too low. Wide compatibility: the solar charger controller with 30a rated discharge current is compatible with 12V or 24V system automatically, GEL.
Easy to use: the charge controller should connect the battery first, then the solar panel, and finally the load! You can change the settings by the simple one-button operation.
Intelligent design: build-in industrial microcontroller for automatical management, memorizing various parameters set by the user and the data won't be lost when the battery runs out. Reliable protection: eeekit solar charge regulator provides over-current protection, short-circuit protection, low voltage and overcharge protection, inverse connection protection, a reliable protector for your devices.
1. Renogy
#adGel, Wanderer Li 30A, and Flooded Batteries, Renogy Wanderer Li 30A 12V PWM Negative Ground Solar Charge Controller Solar Panel Regulator w/ Temp Sensor Function Fit for Lithium, Sealed
#adThe led indicators allow you to set battery types and check the charging staus with ease.
More information #ad
Optimized for 12v batteriescompatible with 12V battery banks on the market, including lithium batteries. Smart 4-stage pwm chargingsmart 4-stage pwm charging bulk, and Equalization increases battery life and improves system performance. Then secure each cable by rotating the screws clockwise CW to the closed position. Intelligent protection against reverse polarity, short-circuit, Float, Boost, overcharging, and reverse current. Compact in sizeWhich makes it easy to install virtually anywhere. Multiple battery adaptation Deep Cycle Sealed AGM, Gel, Flooded and Lithium battery option ready.
| Brand | Renogy #ad |
| Manufacturer | Renogy #ad |
| Height | 1.76 Inches |
| Length | 6.45 Inches |
| Weight | 0.3 Pounds |
| Width | 4.31 Inches |
| Part Number | RNG-CTRL-WND30-LI |
| Model | Charge Controller |
| Warranty | 1-year material and workmanship warranty |
More information #ad
2. Renogy
#adGel, Compatible with Sealed, Adventurer 30A, Renogy 30A 12V/24V PWM Solar Charge Controller with LCD Display Flush Mount Design Negative Ground, Flooded and Lithium Batteries
#adThe lcd screen and multiple LED indicators display the solar charging and battery operation information, customizable parameters, and error codes.
More information #ad
Any negative connection on the solar module, battery and load can be safely earth grounded as required. Negative groundthe adventurer is a negative ground controller. This ensure compatibility with any negative ground system, which is the standard and most conventional way of grounding. Intelligent protection against reverse polarity, overcharging, and reverse current. An included surface Mount Attachment allows for versatility in mounting. Smart 4-stage pwm chargingsmart 4-stage pwm charging bulk, short-circuit, Float, Boost, and Equalization increases battery life and improves system performance.
| Brand | Renogy #ad |
| Manufacturer | Renogy #ad |
| Height | 1.9 Inches |
| Length | 6.56 Inches |
| Weight | 0.6 Pounds |
| Width | 4.5 Inches |
| Part Number | RNG-CTRL-ADV30-LI |
| Model | Adventurer 30A Li 12V/24V |
| Warranty | NEVER connect the solar panel array to the controller without a battery. Battery must be connected first. This may cause a dangerous occurrence where the controller would experience a high open circuit voltage at the terminals. • Ensure input voltage does not exceed 50 VDC to prevent permanent damage. Use the Open Circuit (Voc) to make sure the voltage does not exceed this value when connecting panels together in series. • The charge controller should be installed indoors in a well-ventilated, cool, and dry environment. • Do NOT allow water to enter the controller. |
More information #ad
3. Renogy
#adOff-Grid Solar Power System, Camper, Marine, Trailer, Renogy 400 Watt 12 Volt Monocrystalline Solar Panel Bundle Kit with 4 pcs 100W Panel and 30A Wanderer PWM Charge Controller for RV, Boats
#adCorrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades. Excellent performance22% high solar cell efficiency.
More information #ad
Easy installationpre-drilled holes and Plug&Play cables on the back allow for fast mounting. Warranty5 year warranty and 24/7 technical support team, contact us through Amazon whatever any questions or concerns you have. Corrosion-resistant aluminum frame for outdoor use, allowing the panels to last for decades as well as withstand high winds 2400Pa and snow loads 5400Pa. Wide application1600wh daily output depends on the 4 hours sunlight availability. This panel is suited for applications that require a smaller footprint, making it a favorite for those with RVs, campers, and more!.
| Brand | Renogy #ad |
| Manufacturer | Renogy #ad |
| Height | 1.38 Inches |
| Length | 42.2 Inches |
| Weight | 89 Pounds |
| Width | 19.6 Inches |
| Part Number | RNG-KIT-BUNDLE400D |
| Model | 400 Watt 12 Volt |
| Warranty | 5 years Material and Workmanship Warranty |
More information #ad
4. Renogy
#adRenogy 100 Watt 12 Volt Solar Panel Starter Kit with 100W Monocrystalline Solar Panel + 30A PWM Charge Controller + Adaptor Kit + Tray Cables + Mounting Z Brackets for RV Boats Trailer Off-Grid System
#adMultiple protectionrenogy wanderer-li is a 30a pwm solar charge controller that integrates efficient PWM charging to increase battery life and improve system performance. Easy installationpre-drilled holes and plug&play cables on the back allow for fast mounting.
More information #ad
Wide application400wh daily output depends on the 4 hours sunlight availability. This panel is suited for applications that require a smaller footprint, campers, making it a favorite for those with RVs, and more!. Corrosion-resistant aluminum frame for outdoor use, allowing the panels to last for decades as well as withstand high winds 2400Pa and snow loads 5400Pa. Excellent performance22% high solar cell efficiency. Warranty5 year warranty and 24/7 technical support team, contact us through Amazon whatever any questions or concerns you have.
| Brand | Renogy #ad |
| Manufacturer | renogy #ad |
| Height | 20.87 Inches |
| Length | 47.01 Inches |
| Weight | 19.84 Pounds |
| Width | 1.5 Inches |
| Part Number | KIT-STARTER-100D |
| Model | KIT-STARTER-100D |
| Warranty | Power Output Warranty |
More information #ad
5. Renogy
#adBoats, Gel, Used in RVs, Flooded and Lithium Battery, Renogy Voyager 20A 12V/24V PWM Waterproof Solar Charge Controller w/ LCD Display for AGM, Yachts, Trailers, Voyager 20A
#adIp67 rated waterproof: with an ip67 rated waterproof design, the Voyager controller is suitable for outdoor use and will remain fully operational when exposed to water spray, rain, or condensation.
More information #ad
It provides 4-stage charging Bulk, Absorption, Float and Equalization in order to protect the battery. Support multiple battery types: the voyager controller can automatically sense 12V or 24V system voltage when paired with a Gel, AGM, or Flooded batteries. Backlit lcd displaying system: the voyager comes with an LCD display showing accurate and timely information including charging current, temperature, generated energy, battery voltage, and error codes that allows users to monitor and control charging. It also comes with a Lithium activation feature.
| Brand | Renogy #ad |
| Manufacturer | Renogy #ad |
| Height | 1.4 Inches |
| Length | 6.08 Inches |
| Weight | 0.55 Pounds |
| Width | 3.83 Inches |
| Part Number | RCC20VOYP-G1 |
| Model | Voyager |
| Warranty | 2-year material and workmanship warranty |
More information #ad
6. Renogy
#adRover 40A w/ Bluetooth, Renogy 40A 12V/24V Auto DC Input MPPT Solar Charge Controller Parameter Adjustable LCD Display Solar Panel Regulator fit for Gel Sealed Flooded and Lithium Battery
#adInnovative mppt designdie-cast aluminium design ensuring excellent heat dissipation and Renogy Maximum Power Point Tracking technology with a high tracking efficiency of up to 99% and peak conversion efficiency of 98%.
More information #ad
It is the best charging solution even in cloudy environments where the max power point of the solar panels will fluctuate all day. Full system protectionmeant to safeguard your system, overload, the self-diagnostic capability can assess and protect against reverse polarity, battery over-discharging, short-circuiting, battery overcharging, and reverse current.112v/24v automatically detectautomatically detects 12v or 24v dc system voltages for Non-Lithium battery types, customizable parameters, and the LCD screen and multiple LED indicators display the solar charging and battery operation information, and error codes. Diverse load control connect dc appliances directly to the optional Load Terminals and monitor consumption or set up timer controls directly from the controller.
| Brand | Renogy #ad |
| Manufacturer | Renogy #ad |
| Height | 2.85 Inches |
| Length | 9.37 Inches |
| Weight | 1.39 Pounds |
| Width | 6.81 Inches |
| Part Number | RNG-CTRL-RVR40-BT |
| Model | RNG-CTRL-RVR40-BT |
| Warranty | 2-year material and workmanship warranty |
More information #ad
7. PowMr
#adPWM Solar Controller 30A Fit for MAX 1500W Solar Power 12V 24V 36V 48V Lithium/AGM/Gel/Flooded Battery, 30amp Charge Controller
#ad4 stages pwm charging: Bulk, Equalize, Absorption, Float;. Multiple load control modes: 24Hours Working Control, Light Control, Light and Dual Time Control.
More information #ad
Double usb output 5v/2a and lcd display with Back-lighting shows device’s operating data and working condition. 30a pwm solar controller, gel, intelligent controller able to choose 12V/24V/36V/48V Lead-acid battery Sealed, Flooded and Lithium battery LiCoMnNiO2, LiFePO4.| Brand | PowMr #ad |
| Manufacturer | PowMr #ad |
More information #ad
8. BougeRV
#adAGM, SLD, Solar Panel Intelligent Regulator Positive Ground, FLD, BougeRV Li 10Amp 12V/24V PWM Solar Charge Controller, Dual USB Ports, Gel Battery, Adjustable Parameter with LCD, for Lithium
#adDual usb port, and android phones, light control mode, this PWM solar charge controller can power devices such as iPhone, maximum current can reach 2A. Input and output will be realtime updated in the LCD display.
More information #ad
Custom your system : various parameters adjustable to design the tailored system for you. Please feel free to contact us if you have any problem with the product. Certified by CE and RoHS. Comprehensive protection : with 6 protections, short-circuit, over-temperature, overload, open-circuit, reverse prevention circuit, reverse current protections. Bougerv is dedicated to provide customers with high-quality product through constant improvement and also promise an 18 months warranty of each product. Warranty and attentions : please connect the battery to the solar charge controller first to complete the recognition process and wake up the display. Keep the conductivity, and no need to worry about the short circuit of the device caused by the copper wire branches contact other terminals. Maintain your battery all the time.
| Brand | BougeRV #ad |
| Manufacturer | BougeRV #ad |
| Height | 1.33 Inches |
| Length | 4.72 Inches |
| Weight | 0.3 Pounds |
| Width | 2.95 Inches |
| Part Number | ISE089 |
| Model | 10A PWM Positive |
More information #ad
9. Renogy
#adCompatible Adventurer/Rover Charge Controllers, Renogy Battery Temperature Sensor Solar 118 0.03
#adMore information #ad
| Brand | Renogy #ad |
| Manufacturer | Renogy #ad |
| Height | 0.03 Inches |
| Length | 118 Inches |
| Width | 0.03 Inches |
| Part Number | Battery Temperature Sensor |
| Model | Battery Temperature Sensor |
More information #ad
10. EEEKit
#adEEEkit 30A Solar Charge Controller, Multi-Function Adjustable LCD Display with Dual USB Port Timer Setting PWM Auto Parameter, Solar Panel Charger Controller 12V/24V
#adEasy to use: the charge controller should connect the battery first, then the solar panel, and finally the load! You can change the settings by the simple one-button operation.
More information #ad
Functional lcd display: intuitive lcd display that can clearly indicate the status and data is able to switch modes and parameter configuration, industrial, suitable for home, commercial, etc. Intelligent design: build-in industrial microcontroller for automatical management, memorizing various parameters set by the user and the data won't be lost when the battery runs out. Reliable protection: eeekit solar charge regulator provides over-current protection, short-circuit protection, low voltage and overcharge protection, inverse connection protection, a reliable protector for your devices.
| Brand | EEEKit #ad |
| Manufacturer | EEEKit #ad |
| Height | 2.5 Inches |
| Length | 7 Inches |
| Width | 13.5 Inches |
| Part Number | H026100-E008135338FBA |
More information #ad
