Rain Bird#ad - 20 gallon per minute flow through capacity. Connects to any 3/4" male pipe threaded faucet, garden hose or component. Durable, robust design provides reliable operation. Maintains optimum 25 psi pressure and water flow to Drip lines and emitter devices.
Senninger Irrigation Inc.#ad - This prlg pressure regulator Landscape Grade maintains a constant outlet pressure of 25 PSI 1. 72 bar with a flow range between 05 - 7 gpm 114 - 1590 l/hr. This sturdy inline plastic water regulator can be installed above or below ground. 100% water tested for accuracy. It also helps conserve water and energy and extend sprinkler and drip system life in your garden or nursery.
This blocks the flow of water and measures static pressure, not dynamic pressure. If measuring this regulator with a pressure gauge, do not screw the gauge directly onto the end of the regulator. Made in the usa of engineering-grade thermoplastics. No external metal parts for excellent corrosion resistance.
Works with any standard 3/4" outdoor faucet, sprinkler manifold, distribution uniformity, garden soaker hose or home irrigation system. Proper use of this low flow water regulator maintains sprinkler or droplet flow, hose bib, garden hose, water hose, and the overall efficiency of an irrigation system.
To measure dynamic water pressure, attach a gauge at the end of your irrigation tubing line, or use an inline gauge that allows water to flow unblocked through the regulator. Important note: this irrigation pressure regulator regulates dynamic water pressure the pressure while water is flowing. Senninger pressure regulators are built to rigorous quality standards and are known worldwide for their reliable performance. Ideal for installations requiring lower flows such as solid set, soaker hose and other low pressure agriculture, drip line, residential and commercial irrigation.
Moistenland#ad - Inlet size: ¾" fht female hose thread. Its 3/4 inch hose thread is designed to connect to a standard hose bib and garden hose in the USA. It may be connected to an automated timer, or filter, backflow preventer, if desired.
Moistenland 25 psi preset pressure regulators hose thread are used to reduce and regulate the incoming pressure of a household’s water entering a drip irrigation or micro sprinkler system to the appropriate operating pressure of 25 PSI.
Outlet size: ¾" MHT male hose thread. This 25 psi pressure reducer regulator is ideally suited for use with drip systems, drip lines, and emitters, or any application where low water pressure is desired. High-strength abs construction for durability, available with 3/4” female hose thread to fit all standard hose or pipe thread connections.
Vibrant Yard Co. LLC#ad - Note: some garden hoses are made with aluminum fittings. It is able to withstand a higher inlet pressure compared to a typical plastic regulator and is impervious to sunlight. Upgrade your plastic regulator to this durable, heavy duty lead-free brass regulator.
Inlet size: ¾" fht female hose thread. The regulator body is made of solid lead-free brass which contains less than 025% lead.
Outlet size: ¾" MHT male hose thread. 0-6. 5 gpm gallons per minute flowrate. Maintains water pressure between 20-30 psi 25 psi nominal. Maximum inlet Pressure: 150 psi. To avoid galvanic corrosion, do not connect this regulator to aluminum fittings for prolonged period of time.
It may be connected to an automated timer, backflow preventer, or filter, if desired. Note: as with most drip system pressure regulators, the outlet pressure might slowly build up above 30 psi if the outlet is completely shut. Connects to a standard hose bib or garden hose in USA and Canada.
Raindrip#ad - Lowers incoming water pressure from a water source and filters out particulates for optimal performance of your drip system; Connects to pipe commonly used in underground valve systems. Mpt connection point; Use with a ¾ in.
Comes with one ¾ in. Y” filter. Mpt pressure-Regulating. Attach the pressure-regulating filter to pipe with a ¾ in. Mpt connection point; periodically flush out the system by removing the flush cap, also known as a cleanout cap, and running the water; the filter can also be removed from the middle housing and pulled out to clean.
Mpt x ¾ in. Attach the pressure-regulating filter to pipe with a ¾ in. Fpt swivel Adapter to connect supply tubing.
Regulates water pressure from water source; preset at 30 psi, ideal for most drip irrigation systems; 200-mesh filter washer blocks particles in the water from clogging emitters; filter is removable for cleaning and maintenance; Filter can be flushed out by removing the flush cap or cleanout cap and running water through; also can be removed from the middle housing to clean.
Rain Bird#ad - Use with rain bird free flow manifold models sold separately: MANIFRE1S, MANIFRE4S, and MANIFRE6S. Easily converts a 1/2" riser or existing shrub spray to low volume Drip watering system. Constructed of highly durable UV and chemical-resistant materials to assure long life.
Provides 30 psi pressure regulation for best performance of micro-watering devices. Top outlet accepts a 1/2" threaded Drip manifold sold separately. Designed for use with free flow Drip irrigation manifolds.
Rain Bird#ad - 3/4" x 3/4" male pipe thread; 150 psi pressure rating. 3/4" y filter unit combines filtration and 30 psi pressure regulation in one piece. Reduces the number of components in system and speeds installation. Robust body and cap constructed of glass-filled polypropylene for reliable long-life.
Works with all types and brands of 3/4" irrigation valves. 200 mesh 75 micron stainless-steel filter pre-installed; cap unthreads for quick cleaning. Protects and prevents clogging of downstream Drip irrigation components.
Rain Bird#ad - Includes backflow preventer, 25 PSI pressure regulator and 150 mesh filter. Can also be used to connect to a garden hose. Pressure regulator and mesh filter included.
For automated watering add a reliable Rain Bird professional-grade hose end timer Amazon ASIN B006JZ514U sold separately. Multi-function kit helps ensure proper operation of your Drip irrigation system.
Connects 1/2" dip tubing to any 3/4" male pipe threaded faucet or garden hose. Easily attaches to any outdoor faucet. Compression fitting provides a leak-proof seal to 1/2" Drip tubing. Constructed of highly durable UV and chemical-resistant materials to assure long life. Backflow preventer included.
Vibrant Yard Co. LLC#ad - The regulator body is made of solid lead-free brass which contains less than 025% lead. To avoid galvanic corrosion, do not connect this regulator to aluminum fittings for prolonged period of time.
Inlet size: ¾" fht female hose thread. Maintains water pressure between 20-30 psi 25 psi nominal. Maximum inlet Pressure: 145 psi. Outlet size: ¾" MHT male hose thread. It is able to withstand a higher inlet pressure compared to a typical plastic regulator and is impervious to sunlight.
0-6. 8 gpm gallons per minute flowrate. Upgrade your plastic pressure regulator to this durable, heavy duty lead-free brass pressure regulator. Note: some garden hoses are made with aluminum fittings. It may be connected to an automated timer, backflow preventer, or filter, if desired. Connects to a standard hose bib or garden hose in USA and Canada.